Mold in Atlanta
Mold spores are everywhere. They are in the air flying all around us. They are perfectly harmless when in small numbers. They become a real problem, however, when they are allowed to grow within our homes. Mold in Atlanta in large amounts can negatively affect our health. When allowed to grow in our homes, they can cause a great deal of damage to our personal belongings as well as the structure of our homes.
It may seem like mold in Atlanta grows more rapidly during the cold winter months. This is only because the conditions in winter are ideal for the growth of mold. Many of us tend to close ourselves into our homes when the temperature starts to drop. As a result of all the requirements for energy efficiency, our homes are tightly sealed during winter. This can result in trapping of indoors and the rise of humidity levels.
Warm conditions resulting from the turning up of our thermostats in winter make the indoor home environment perfect for the growth and proliferation of mold.
Decaying matter around the home resulting from fallen leaves and dead plants results in the release of mold spores into the air. These are spread and settle indoors where they grow.
Increased humidity as a result of the wet winter conditions provides ideal conditions for the growth of mold.
Mold growth can be prevented. Mold growing in your home requires moisture, warmth, and food. Depriving mold of any of these three items will stop it from growing, but it will not kill the mold that is already there. Mold spores will remain dormant, and if the moisture, warmth, and food all reappear, mold will begin to grow again.
So what can you do if you’re concerned about mold growing in your home? The key step you can take is to identify any moisture concerns.
The purpose of this article is to provide you with 15 mold prevention tips so that you can proactively prevent mold from growing in your home!
Mold Prevention Tip #1: Audit Your Home For Problem Areas!
It is difficult to mold-proof a home. However, you can take proactive steps to determine if you have problems that could lead to mold concerns.
- Does the basement flood?
- Do you notice frequent condensation on windows?
- Is there a water stain on the ceiling from a persistent leak?
- Is your basement damp?
- Does water flow into your home’s foundation?
Addressing these questions may entail some upfront costs to fix, but it will be worth the investment in preventing future mold problems.
It is also important to note that if you are renovating your home or considering building a new home, that you may want to consider researching mold prevention products, including mold-resistant drywall and sheetrock, and mold inhibitors for paints.
Mold-resistant drywall is recommended because the traditional drywall is made up of gypsum plaster core pressed between piles of paper, making it highly susceptible to mold. What this means is that in the presence of moisture and water, the traditional drywall acts like a sponge absorbing the moisture leading to mold. Since the traditional drywall is so porous, the only remedy to removing the mold is to tear out the drywall.
In contrast, mold-resistant drywall is paperless because the gypsum core is covered in fiberglass, meaning it is water-resistant and therefore less susceptible to mold growth. Moisture resistance drywall should be used in bathrooms, laundry rooms, basements, and kitchens because these areas of the home are most prone to moisture.
Mold Prevention Tip #2: Dry Wet Materials Immediately!
Mold can not grow without moisture and given the right conditions, it will begin growing within 24 to 48 hours.
With this in mind, tackle wet areas right away.
- Don’t leave wet clothes or other items lying around the house, dry them outside if possible.
- Dry spills on carpet and floors.
- Dry your clothes after washing them by putting them in the dryer soon after the wash cycle is complete.
- If heavy rainfall causes seepage into your basement, make sure you dry the area promptly and contact a company to waterproof your basement to prevent future occurrences.
- If you experience a flood event, dispose of water-damaged carpets, bedding, and furniture if they can not be dried completely. Ideally, contact a restoration company to manage the cleanup and drying process.
Mold Prevention Tip #3: Clean, Disinfect, and Dry Surfaces!
- Vacuum and clean regularly to remove possible sources of mold growth.
- Pay special attention to bathrooms and other areas of your home that are likely to generate a lot of moisture.
- Non-porous surfaces (tile, stone, laminate) can be cleaned well with disinfectants and other cleaners.
Mold Prevention Tip #4: Repair Water Leaks!
- Repair water leaks in your roof, windows, or any other part of the home as soon as possible.
- Over time, constant leaks will cause moisture to buildup leading to mold growth.
Ensure that you have a professional contractor check your home for waterproofing. This will ensure that you take all measures necessary to prevent the growth of winter mold in Atlanta in your home. A professional contractor can also advise you on further measures to take to keep your home mold-free.